Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

微波瑞利散射法测定空气电火花激波等离子体射流的时变电子密度

大气压空气电火花激波等离子体射流的电子密度在亚微秒时间尺度上瞬变,其电子密度的测定很难.基于微波瑞利散射原理,本文测量了空气电火花冲击波流注放电等离子体射流的时变电子密度.实验结果表明:测量系统的标定参数A为1.04 × 105 V·Ω·m–2;空气流注放电等离子体射流的电子密度与等离子体射流的半径和长度有关,结合高速放电影像展示的等离子体射流的等效半径和等效长度,测定的电子密度在1020 m–3的量级,且随时间先快速增长至峰值再成指数衰减.此外,本文还探讨了等离子体射流的不同等效尺度对测定结果的影响;分析结果表明,采用时变等效半径和时变等效长度的计算结果最有效,且第1个快速波峰是由光电离的电离波导致的.     

铋化物发光玻璃中银表面等离激元对铒离子的发光增强作用

局域表面等离激元可以由自由空间的光直接激发,这也是局域表面等离激元的优点所在。研究铋化物发光玻璃中纳米银颗粒的表面等离激元对铒离子发光的增强效应、进一步的提高铋化物发光玻璃中铒离子的发光性能很有意义。首先,测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃与(B)Er 3+(0.5%):铋化物发光玻璃样品的吸收谱,发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃在约600.0 nm处有一个较弱的宽的银表面等离激元共振吸收峰。同时发现两者都有典型的铒离子的吸收峰,它们的吸收几乎完全一样:在波峰形状、峰值强度和峰值波长等方面都很相近。测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃和(B)Er 3+(0.5%):铋化物发光玻璃样品的激发谱,发现有位于379.0,406.0,451.0,488.0和520.5 nm的5个550.0 nm可见光的可见激发谱峰,和位于379.0,406.5,451.0,488.5,520.5,544.0,651.5和798.0 nm的8个1531.0 nm红外光的红外激发谱峰,容易指认出依次为Er 3+的4I 15/2→4G 11/2,4I 15/2→2H 9/2,4I 15/2→(4F 3/2,4F 5/2),4I 15/2→4F 7/2,4I 15/2→2H 11/2,4I 15/2→4S 3/2,4I 15/2→4F 9/2和4I 15/2→4I 9/2跃迁的吸收峰,通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外激发谱的最大增强依次分别是238%和133%。最后,测量了它们的发光谱,发现有位于534.0,547.5和658.5 nm的三组可见发光峰,容易指认出依次为Er 3+的2H 11/2→4I 15/2,4S 3/2→4I 15/2,4F 9/2→4I 15/2荧光跃迁。还发现红外发光峰位于978.0和1531.0 nm,依次为Er 3+的4I 11/2→4I 15/2和4I 13/2→4I 15/2的荧光跃迁。通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外发光谱的最大增强依次分别是215%和138%。对于银表面等离激元增强铒离子发光的机理,认为主要为纳米银颗粒的局域表面等离激元共振,造成金属纳米结构附近产生的局域电场的强度要远大于入射光的电场强度,从而导致了金属纳米结构对入射光产生强烈的吸收和散射,进而导致了荧光的增强;即局域表面等离子体共振局域场的场增强效应。     

Free control of far-field scattering angle of transmission terahertz wave using multilayer split-ring resonators’ metasurfaces

To enhance transmission efficiency of Pancharatnam–Berry (PB) phase metasurfaces, multilayer splitring resonators were proposed to develop encoding sequences. As per the generalized Snell’s law, the deflection angle of the PB phase encoding metasurfaces depends on the metasurface period’s size. Therefore, it is impossible to design an infinitesimal metasurface unit; consequently, the continuous transmission scattering angle cannot be obtained. In digital signal processing, this study introduces the Fourier convolution principle on encoding metasurface sequences to freely control the transmitted scattering angles. Both addition and subtraction operations between two different encoding sequences were then performed to achieve the continuous variation of the scattering angle. Furthermore, we established that the Fourier convolution principle can be applied to the checkerboard coded metasurfaces.     

考虑地表反射类型的气溶胶散射偏振特性

采用逐次阶散射法求解矢量辐射传输方程来研究气溶胶在不同地表反射模型下的散射偏振特性.首先,选取单一地表反射模型和耦合地表反射模型两种地表反射模型.然后,根据地表反射模型计算得到相应的地表反射率,进而采用逐次阶散射法对矢量辐射传输方程进行求解,得到散射光的Stokes矢量.最后,由Stokes矢量计算得出散射光的偏振度.仿真结果表明,两种地表反射模型下气溶胶单次散射的散射辐射强度和线偏振度均相等;耦合地表反射模型的总散射辐射强度和线偏振度总是大于单一地表反射模型;单一地表反射模型的气溶胶单次散射相对总散射的贡献总是大于耦合地表反射模型.研究结果对气溶胶光学特性的反演具有一定意义.     

A solvent-governed surface state strategy for rational synthesis of N and S co-doped carbon dots with multicolour fluorescence

ABSTRACT

Multicolour emissive carbon dots (CDs) are widely investigated by virtue of their merits on fluorescent properties. Method on heteroatom doping assisted with various solvents has been proved efficient in achieving multiple-colour-emissive CDs, especially long-wavelength emission. Herein, a synthesis of multicolour-emissive CDs by controlled surface function is reported. By tuning the thermal-pyrolysis temperature and molar ratio of reactants, optimal emission of the resulted CDs gradually shifts from blue to yellow light with the assistance of different solvents. According to the emissive relationship dependent on excitation, fluorescence lifetimes, and FT-IR of these CDs, the different surface states participated with S and N elements on the surface of carbogenic core govern fluorescent colours of the CDs. In terms of the applications, blue CDs (B-CDs) exhibits high sensitivity for ion detections of Ag⁺ and Fe³⁺, which is further illustrated to have different quenching mechanisms each other because that these ions have the affinity interaction with different surface groups of the CDs. Moreover, blue and yellow CDs solutions are mixed with PVP water solution to fabricate white-light CDs/PVP film, which exhibits stable fluorescence with a CIE coordinate of (0.32, 0.33) and endows these CDs as potentially fluorescent nanomaterial in the solid state lighting field.     

Broadband mode converter and multiplexer based on dielectric-loaded plasmonic waveguides

We theoretically demonstrate a broadband mode converter and multiplexer based on plasmonic waveguides loaded with structured dielectrics. The proposed device can realize conversions between a fundamental TM₀ mode and a first order TM₁ mode, as well as (de)multiplex them with another TM₀ mode. Our design exhibits as wide as 400 nm bandwidth and as short as 6~7 μm coupling length. This work has potential application in high density photonic integrated devices for both computing and communication applications.     

新型非对称二苯并[b,f][1,5]二氮杂环辛四烯的合成

以两种不同取代的2-氨基二苯甲酮为原料,氯苯为溶剂,BF3-Et2O为脱水剂,通过分子间脱水一步环化缩合制备非对称二苯并[b,f][1,5]二氮杂环辛四烯衍生物。运用HPLC监控反应过程,优化合成工艺,得到最佳反应条件为:等物质的量的两种不同取代2-氨基二苯甲酮和BF3-Et2O,在氯苯中回流反应12 h。化合物4a^4c为新化合物,其结构经1H NMR,13C NMR和MS(ESI)表征。     

Electrical and Thermal Transport Properties of n-type Bi6Cu2Se4O6 (2BiCuSeO + 2Bi2O2Se)

New thermoelectric materials, n-type Bi₆Cu₂Se₄O₆ oxyselenides, composed of well-known BiCuSeO and Bi₂O₂Se oxyselenides, are synthesized with a simple solid-state reaction. Electrical transport properties, microstructures, and elastic properties are investigated with an emphasis on thermal transport properties. Similar to Bi₂O₂Se, it is found that the halogen-doped Bi₆Cu₂Se₄O₆ possesses n-type conducting transports, which can be improved via Br/Cl doping. Compared with BiCuSeO and Bi₂O₂Se, an extremely low thermal conductivity can be observed in Bi₆Cu₂Se₄O₆. To reveal the origin of low thermal conductivity, elastic properties, sound velocity, Grüneisen parameter, and Debye temperature are evaluated. Importantly, the calculated phonon mean free path of Bi₆Cu₂Se₄O₆ is comparable to the interlayer distance for BiO─CuSe and BiO─Se layers, which is ascribed to the strong interlayer phonon scattering. Contributing from the outstanding low thermal conductivity and improved electrical transport properties, the maximum ZT ≈0.15 at 823 K and ≈0.11 at 873K are realized in n-type Bi₆Cu₂Se_3.2Br_0.8O₆ and Bi₆Cu₂Se_3.6Cl_0.4O₆, respectively, indicating the promising thermoelectric performance in n-type Bi₆Cu₂Se₄O₆ oxyselenides.